Design requirements for corrugated washers

location:Home / NEWS / Design requirements for corrugated washers

Design requirements for corrugated washers

date:[2015-03-26]     pk_hits:
波形垫圈是由多个波峰和波谷构成的薄片环状金属元件,并拥有良好的弹性。
在设计波形垫圈时,先根据波形垫圈的形状来设计模具。波形垫圈用环形圈通过冲压的方式形成三个等高的波峰和波谷,并且要分步均匀。制造加工出波形垫圈的模具,并能够令波形垫圈在上料装置中波峰和波谷处在同一条直线上。
波形垫圈
一般波形垫圈的厚度保持在05-2mm之间,用不锈钢等具有弹性性能的材料制作。在上料机构中,为了使波形垫圈在一定的时间间隔内,每次提供相同数量的波形垫圈到拾取位置,在上料过程中,使用步进电机的传动方式来完成。
Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts