The following are the relevant waveform washer parameters

location:Home / NEWS / The following are the relevant waveform washer parameters

The following are the relevant waveform washer parameters

date:[2015-03-22]     pk_hits:
在螺纹紧固件中因螺栓、螺钉、螺母的支承面不可能做得很大(受材料与工艺的限制),为减小承压面的压应力,保护被连接件的表面而采用波形垫圈。为防止连接副的松动采用防松的波形垫圈和多齿形锁紧垫圈、圆螺母止动垫圈以及鞍形、波形、锥形波形垫圈。波形垫圈主要用于减小压强,当有的部位拧紧轴向力很大时,易使垫圈压成碟形,这时可改用材料和提高硬度来解决。对于用于高速拧紧(气动或电动)的波形垫圈,好采用表面磷化处理的垫圈,提高其减磨性能,否则易摩擦发热而烧坏或张口,甚至损坏被连接件表面。对于薄板连接处,不应采用波形垫圈结构。据统计,波形垫圈在汽车上使用得越来越少了。

下面是相关的波形垫圈参数:
波形垫圈
Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts