Why is there a thickened layer on the outer edge of the waveform washer substrate

location:Home / NEWS / Why is there a thickened layer on the outer edge of the waveform washer substrate

Why is there a thickened layer on the outer edge of the waveform washer substrate

date:[2022-09-08]     pk_hits:
为什么波形垫圈基体外沿设有加厚层?雷驰将为大家详细解答,一起去看看吧!
挡圈基体上表面设有一内弧形面。制造工艺简单,结构合理,挡圈弹性好,将原来的平面接触改为了内弧面接触,的降低了固定零件的使用应力,从而使固定牢靠,定位准确,而且通过加厚层的设计提高了其使用寿命,增加了工作效率。

波形垫圈因为由多层材料组成 因此在相同的压缩行程下的 K 值曲线较 WL 型平缓 适用于弹力较大 而整个工作行程弹力释放又要求较均匀的情况中 . 所用材料有碳钢、不锈钢、铜合金等
Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts