The retaining ring for shaft has overheating sensitivity and temper brittleness tendency during heat treatment

location:Home / NEWS / The retaining ring for shaft has overheating sensitivity and temper brittleness tendency during heat treatment

The retaining ring for shaft has overheating sensitivity and temper brittleness tendency during heat treatment

date:[2018-05-25]     pk_hits:
轴用挡圈的材料特性:它是用途较广的碳素弹簧钢,与65钢相比,具有较高的强度、硬度、弹性和淬透性,临界淬透直径在水中一般为30~50mm,油中一般为16-32mm,热处理时有过热敏感性和回火脆性倾向,水淬时易开裂,一般采用油淬,截面尺寸>80的宜水淬油冷:退火后切削性尚好,但冷变形塑性低,焊接性能差。
挡圈(卡簧/卡环)

常规包装以油纸或塑料为一个批次包装,表面一般以磷化发黑为主,俗称外卡。轴用挡圈生产时需要注意的几方面;一是表面平整;二是硬度弹性合格;三是不能有边角毛刺,国内目前厂家有质品五金,具备了挡圈成熟化工艺。
Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts